To receive the most up-to-date product availability, pricing and delivery options, enter your zip code or log in to your account
Zip Code should not be blankEmail and Password should not be blank
Enter Delivery Zip Code
or
Log In
TELL US MORE
Are you currently located in California?
8 characters minimum
One number
One lowercase letter
One uppercase letter
One special character (!@#$%&*)
Password cannot contain space
Pursuant to CA SB 478, if you are located in California, Airgas cannot display your product pricing until all items have been added to your shopping cart so that we can calculate all applicable fees, including, but not limited to, shipping and handling fees.
ESAB® AtomArc® E11018-M H4R T Low Alloy Steel Electrode with 5/32" Dia is designed for welding T-1 and a similar high strength steels. It is suitable for many other applications, especially where high-strength welds with excellent low temperature impact properties are required. The flux coatings are designed to effectively resist moisture pick-up in opened containers. The mechanical properties of the welded joints equal or exceed the properties of the base steel in either the welded or stress relieved condition, thus giving 100% design joint efficiency. The improved coating offers an extra degree of reliability, especially for electrode exposed to high humidity environments. Moisture testing results are conducted in accordance with AWS A5.1 and A5.5 specifications. AWS structural code provides a maximum of 0.4% moisture by weight for all E70XX electrodes. Although moisture-resistant coatings prolong the exposure time, storage and reconditioning should not be excluded. Low hydrogen electrodes are available in a variety of strength levels and chemical analysis for welding almost every type of mild and low alloy steel. The introduction of these iron powder electrodes, fabricators can increase their productivity while reducing their overall welding cost. Electrode comes in a 50 lb hermetically sealed container.
Features
Moisture resistant coatings are incorporated in all AtomArc® electrodes
The flux coatings are manufactured to effectively resist moisture pick up in opened containers
The improved coating provides an extra degree of reliability, especially for electrodes exposed to high humidity environments
Moisture testing results are conducted in accordance with AWS A5.1 and A5.5 specifications
AWS structural code allows a maximum of 0.4% moisture by weight for all E70XX electrodes
Military requirements vary depending on the specific electrode classification
Although moisture resistant coatings prolong the exposure time, storage and reconditioning should not be eliminated
Mechanical properties of the welded joints equal or exceed the properties of the base steel in either the as welded or stress relieved condition
Specifications
AWS A5.5
AWS A5.5: E11018MH4R
ASME SFA 5.5
QPL-22200/1
MIL-11018-M
Applications
General fabrication
Railroad car
Mobile machinery
Bridge construction
Civil construction
Shipbuilding
Caution
Preheat should be used on hardenable steels to prevent the formation of a hard heat-affected zone
Preheat may also be required in welding heavy sections
